How to Sew Self-Adhesive Binding Tape for Clean Bag Edges

Quick Answer

Sew self-adhesive binding tape by peeling, sticking, and stitching directly—no pins or clips needed. This method gives you clean bag edges with less prep time.

Steps to Sew Self-Adhesive Binding Tape

1. Prepare Your Edge: Trim your bag fabric so the edge is even and free of loose threads. A clean edge helps the tape stick fully. Check that the fabric edge is straight; uneven edges can cause gaps in the binding.
2. Peel and Stick the Tape: Peel a section of the backing from the tape and press it onto the fabric edge, starting at a seam or corner. Work in short sections to avoid wrinkles. If the tape wrinkles, lift and re-stick it immediately—the adhesive is repositionable for a few seconds.
3. Sew Along the Tape: Stitch close to the inner edge of the tape using a straight or zigzag stitch. The adhesive holds the tape in place, so you don't need pins. Use a new or sharp needle; a dull needle can drag the tape and cause puckering.
4. Fold and Finish the Corner: At a corner, fold the tape over the edge at a 45-degree angle, then continue sticking and stitching. This creates a clean mitered corner. If the tape doesn't stick well at the fold, apply a tiny dab of fabric glue to secure it.
5. Trim Excess Tape: After sewing, trim any extra tape at the ends, leaving a 1/4-inch tail to tuck under for a neat finish. Avoid cutting too close to the stitches—leave enough tape to prevent unraveling.

Product Facts

• 1" Stick 'n Sew™ Self-Adhesive Binding Tape in Diagonal Rainbow Grunge Stripes (10 Yard Roll): 1 roll = 10 yards, 1 inch wide, full adhesive backing The width covers most binding needs, and the adhesive eliminates pinning, saving time on every seam.