Back to Blog
How-to Guides 2026-11-15 Your Sewful Therapy is in Session... – Sewful Therapy 0 views

Sew Hexatex 420D Galaxy Prints Without Harming the Coating

Sew Hexatex 420D Galaxy Prints Without Harming the Coating

Practical steps for sewing Sewful's adhesive-backed Hexatex 420D Andromeda Galaxy print, from planning cuts to finishing seams without wrecking the water-resistant coating.

Why Hexatex 420D needs a gentler sewing approach

Sewful's Hexatex 420D is a 100% polyester ripstop with a water-resistant finish and an adhesive backing. The Andromeda Galaxy print is sold by the yard as a precut, and the record lists a width of 18"x58" with a +/- 0.5" variance from cutting. That adhesive backing is the part that changes your sewing plan: every needle hole and every re-stitch is harder to undo than on plain cotton, so the goal is to get the seam right the first time.

The ripstop weave helps resist tearing and ripping, and the fabric is UV resistant, which makes it a sensible choice for bags, linings, and other projects that see daylight. But the same tight weave and coating mean you should treat this as a coated fabric, not a quilting cotton. Plan your cuts, test your needle and stitch on a scrap, and keep handling to a minimum once the adhesive is exposed.

What the Andromeda Galaxy record confirms

  • Sewful NON-Adhesive Hexatex 420D (Yard): Andromeda Galaxy: Sewful NON-Adhesive Hexatex 420D (Yard): Andromeda Galaxy is a 100% polyester ripstop, 420 denier, with a water-resistant finish and UV resistance. These are the properties that make the fabric suitable for bags and outdoor-adjacent projects, and they also explain why you should avoid unnecessary needle holes.
    Sewful NON-Adhesive Hexatex 420D (Yard): Andromeda Galaxy
    Sewful NON-Adhesive Hexatex 420D (Yard): Andromeda Galaxy
  • Sewful NON-Adhesive Hexatex 420D (Yard): Andromeda Galaxy: The product record describes an adhesive backing and lists applications such as custom adhesive bindings, custom zipper tape, double-sided fabric for unlined materials, re-purposed fabric, and linings for wallets and bound bags. The adhesive backing is a construction tool, not just a label. It lets you bond before you stitch, which reduces the amount of handling and re-sewing on a coated surface.
  • Sewful NON-Adhesive Hexatex 420D (Yard): Andromeda Galaxy: The precut is listed as 18"x58" with a +/- 0.5" variance, and cuts are not continuous. Plan your pattern pieces around the actual cut you receive rather than assuming a perfectly continuous or exact-width piece.

A sewing sequence that protects the coating

The order below is built around the adhesive backing and the water-resistant finish. It is a practical sequence, not a manufacturer's instruction, so test each step on a scrap before committing to your main piece.

  1. 1. Unroll, flatten, and inspect before cutting: Lay the precut flat and check the actual width against the listed 18"x58" with its +/- 0.5" variance. Note any areas within 2" of the selvage, which the record says are not considered damaged or flawed. Mark your pattern pieces around those areas rather than through them.
  2. 2. Match your pattern to the print scale: The record lists a regular scale of 2"–3" and a large scale of 3.5"–4" for the print. Choose pattern pieces that let the galaxy motif read clearly; small, fussy pieces can chop up a large-scale print.
  3. 3. Test needle and stitch on a scrap: The supplied record does not specify a needle size or stitch length. Use a scrap from the same precut to test a sharp or microtex needle and a slightly longer stitch, then check the back for coating damage and the front for puckering before you sew the real piece.
  4. 4. Bond the adhesive side before stitching where it helps: The adhesive backing is intended for applications like bindings, zipper tape, and double-sided fabric for unlined materials. Press the adhesive according to the product's own guidance if available; the supplied record does not include pressing temperatures or times, so do not guess. A bonded seam is easier to stitch once than a pinned seam you have to redo.
  5. 5. Sew with support, not tension: Let the feed dogs move the fabric and avoid pulling it from the front or back. On a coated ripstop, pulling stretches the weave and enlarges needle holes. If the fabric sticks, a layer of tissue paper or a smooth presser foot can help, but test first.
  6. 6. Finish seams with the coating in mind: The record does not list a specific seam-finishing method. For a water-resistant bag lining, a bound or flat-finished seam keeps raw edges enclosed without adding bulk. Avoid heavy topstitching through the adhesive unless the design needs it.

Needle, thread, and presser foot choices to test

Because the record does not confirm a needle size or stitch length, treat these as starting points for your scrap test rather than a manufacturer's specification.

  • Needle: A sharp or microtex needle in a size that suits the fabric weight is a common starting point for coated polyester. Test on a scrap and check for coating cracks or skipped stitches.
  • Thread: A polyester or polyester-wrapped thread matches the fabric's 100% polyester content and its outdoor-friendly UV resistance. Cotton thread is softer but can be a mismatch for a water-resistant project.
  • Presser foot: A smooth, non-stick foot or a walking foot can help on coated fabric. Test both on a scrap; the goal is to avoid drag that stretches the weave.
  • Pins: The adhesive backing may let you skip pins in some areas. Where you do pin, pin inside the seam allowance so holes stay hidden.

Using the Andromeda Galaxy print as a bag lining

The product record lists linings for wallets and bound bags as an intended application, which makes this print a natural fit for a bag interior. The adhesive backing is especially useful here: you can bond the lining to an unlined outer fabric to create a double-sided material, then stitch the edges. That reduces the number of seams you need to finish on the inside of the bag.

Keep the water-resistant finish in mind when you plan the lining. A bound or flat-finished seam keeps the interior tidy without exposing raw edges, and it avoids extra stitching through the coated face. If you are using the print as a contrast lining, cut the lining pieces slightly larger than the outer pieces to allow for the fabric's body and the +/- 0.5" width variance in the precut.

Color, cut, and ordering realities to plan around

The record notes that different monitors and devices will show slightly different color representations, and that colors will be very close but not identical. If you are matching the Andromeda Galaxy print to a solid fabric or a zipper, order a swatch or accept that the match will be close rather than exact. Cuts are not continuous, so if your project needs a long continuous piece, check the precut size against your pattern before you order.

The catalog price is listed at USD 13.20 against a comparison price of USD 20.00, and the record notes that additional postage may be due for vinyl when the order is ready to ship. International orders carry a $30 shipping deposit, with overages over $2 refunded and surcharges over $2 invoiced. None of these details change how you sew the fabric, but they do affect your timeline, so order with enough lead time for your project.

Related Articles

Customer Service
Home
Products
Cart
Profile