Sewing Weft & Warp Slick Orange Stripe Floral Easily
By Your Sewful Therapy is in Session... – Sewful Therapy | Published: 2026-10-23
Category: How-to Guides
Learn how to sew Weft & Warp Slick fabric in the Orange Stripe Floral pattern without frustration. Tips to handle the slippery surface and match stripes.
Quick Answer
To sew Weft & Warp Slick Orange Stripe Floral fabric, use a sharp microtex needle, lots of pins, and a walking foot. The bonded poly nylon finish makes the fabric slippery, so careful preparation is key.
Why This Fabric Needs Special Handling
The Weft & Warp Slick fabric has a bonded poly nylon finish that gives it a glossy, smooth surface. While beautiful, this finish also makes the fabric slide around on your sewing machine, leading to uneven seams and skipped stitches. The Orange Stripe Floral pattern has a clear geometric direction, so matching stripes adds another layer of care.
Because the fabric is precut in 1 yard (36 inches by width of fabric) pieces, you often work with manageable lengths. But the slipperiness can still cause frustration if you don't adjust your technique.
Step-by-Step: Sewing Weft & Warp Slick Orange Stripe Floral
- Prepare Your Workspace and Tools: Clear a large, flat surface. Use a rotary cutter and a sharp new blade on a self-healing mat. Change your sewing machine needle to a size 70/10 or 80/12 microtex (sharp) needle. A walking foot or even-feed foot is ideal to prevent layers from shifting. Test your stitch on a scrap piece first to confirm tension is balanced.
- Cut Carefully to Match Stripes: Press the fabric gently on a low heat (polyester setting) using a pressing cloth. Align the stripe pattern before cutting. Pin the fabric layers together with fine silk pins placed perpendicular to the seam line every 2-3 inches. Cut with the grain, following the stripe lines. Use pattern weights instead of pins if your fabric shifts too much; avoid over-handling the fabric.
- Stabilize Seams as You Sew: Reduce your stitch length to 2.5 mm. Sew slowly, guiding the fabric gently without pulling. For long seams, use a strip of tissue paper or tear-away stabilizer under the fabric to prevent slipping. Remove the paper after stitching. If the fabric puckers, check that you are not stretching it as it feeds through the machine.
The Fabric We Used
- Weft & Warp Slick - Orange Stripe Floral (Yard): Bonded Poly Nylon, precut 1 yard (36" x WOF). The bonded finish creates a slippery surface that requires special handling to prevent shifting during cutting and sewing.
Weft & Warp Slick - Orange Stripe Floral (Yard)
